Hinges

Foresti & Suardi

Brass 90 Degree Locking Hinge

A heavy and robust brass hinge produced in Italy by Foresti & Suardi. In the open position the hinge locks at 90 degrees with a sprung ball bearing. The hinges are drilled for 14-gauge countersunk screws and are available in polished brass and...

Davey and Company

Bronze Rail Hinge

Heavy bronze safety rail hinge consisting of three pieces made in the UK by Davey & Co. Use this cast bronze rail hinge to create a a boarding gate on larger vessels. Available in two sizes, and can be chrome plated to suit existing deck hardware. ...

Davey and Company

Bronze Hinge - Single Tail

Cast in bronze and polished, these single-tail hinges are manufactured in England by Davey. The bronze hinges are available in a polished bronze finish, or chrome plated to match other hardware. Requires eight 8g screws for fastening (not included). ...

Davey and Company

Brass Hinge - Curved Lift-Off

Traditional style lift-off hinges cast in brass with a polished finish. When fitting to companionway doors (or similar applications) one straight hinge (sold separately) and one curved hinge are used per door. The curved hinges are left...

Davey and Company

Brass Tee Hinge

Heavy duty cast brass hinges by Davey in three sizes. These solid brass hinges are available in a polished brass finish, or chrome plated to match other hardware. SKUStrap Length (A)Height (C)Strap WidthDavey's Code 027089 6" (150mm) 4"...

Davey and Company

Bronze Skylight Hinge

Cast bronze hinge specially designed for skylights.  The centre section is curved to fit over the skylight frame. These polished bronze hinges are available in two sizes. Manufactured in England by Davey & Co, these quality hinges are a...

Davey and Company

Brass Counter Top Hinge

Premium quality brass counter-top hinges from Davey & Co of England.  These dove-tail brass hinges have a clear lacquer coating to keep them looking bright. They allow a benchtop flap to open and fold over through 180 degrees. Manufactured from...

Davey and Company

Brass Lift-Off Hinge - Davey

Brass separating hinges with a brass pin in a range of sizes.  These brass hinges have a satin finish. Refer to the table below for sizes - the hand is determined by which side retains the pin. Sold separately. SKU Length Width (open) Handed...

Davey and Company

Davey Brass Butt Hinge

Brass butt hinges with a brass pin in a range of sizes.   Heavy gauge brass hinges (not stamped) with an all-brass construction. These brass hinges have a satin finish. Note - brass screws are sold separately. SKULengthWidth (open)Thickness...

Foresti & Suardi

Brass Locker Hinge

Locker hinges cast in brass from Italian company Foresti & Suardi.  The all-brass hinges are drilled for 10-gauge countersunk screws and are available in polished brass and chrome-plated brass finishes. Sold individually and screws are not...

Foresti & Suardi

Brass Separating Hinge

All-brass separating hinges from Italian company Foresti & Suardi. Use these hinges for cupboards, access ways and hatches where the door needs to be easily removed. The hinges are drilled for 8-gauge countersunk screws (sold separately) and...

Foresti & Suardi

Brass Butt Hinge

All-brass butt hinges from Italian company Foresti & Suardi.  The hinges are drilled for 8-gauge countersunk screws (not included) and are available in polished brass and chrome-plated brass finishes. SKU Overall Length Width Finish Fastening...

Foresti & Suardi

Brass Butt Hinge - Short

Small all-brass butt hinges from Italian company Foresti & Suardi.  The hinges are drilled for 8-gauge countersunk screws (sold separately) and are available in polished brass and chrome-plated brass finishes. SKU Overall LengthBase...

Foresti & Suardi

Brass Hatch Hinge - Offset

Brass strap hinges from Italian company Foresti & Suardi.   These brass hinges are offset by 35mm (1-1/2") making them ideal for use as deck hatch hinges.   The hinges are drilled for 10-gauge countersunk screws (sold separately) and are...

Foresti & Suardi

Brass Strap Hinge - Asymmetric

Small asymmetric brass strap hinges from Italian company Foresti & Suardi. These brass hinges are drilled for 8-gauge countersunk screws (not included). SKU Overall Length Width Finish Fastening F&S Product Code 130725 103mm (4") 32mm...

Foresti & Suardi

Brass Strap Hinge

All brass strap hinges from Italian company Foresti & Suardi in two sizes. These brass hinges are available in two sizes and are drilled for 8-gauge countersunk screws Screws are sold separately.. SKU Overall Length Width Finish Fastening F&S...

Spartan Marine Hardware

Bronze Butt Hinges 4" - Spartan

Bronze butt hinge from US manufacturer Spartan measuring 3-1/2" x 1-3/8" (88mm x 35mm) when open. These bronze hinges feature a stainless steel hinge pin and can be fastened with 6 x 8-gauge screws.  They are suitable for hatches, doors cabinets,...

Spartan Marine Hardware

Spartan Bronze Strap Hinge

Bronze strap hinge from US manufacturer Spartan measuring 5-1/2" x 1-1/4" (148mm x 31mm) when open. These bronze hinges feature a stainless steel hinge pin and can be fastened with 6 x 10-gauge screws.  They are suitable for hatches, doors...

MURRAY - Traditional Winches & Marine Hardware

Chromed Bronze Separating Hinges (pair)

Famous "snap-apart" or separating hinges. These quality bronze hinges have a sprung centre pin to enable quick removal without the use of tools.  They work exactly like normal hinges, but pull the sprung pin on each hinge and simply remove the...