Mast, Boom & Gaff

Davey and Company

Bronze Boom Crutch Socket

A solidly cast bronze boom crutch socket from Davey & Co, complete with drain hole.  Use this fittiing to lock a removable boom crutch in position within the cockpit. Available in a polished bronze finish, or chrome plated to match existing...

Davey and Company

Timber Parrel Beads

Parrel beads are normally used to hold the jaws of a sliding gaff to the mast.   Our wooden parrel beads are turned from Ash and coated with linseed oil.  They are manufactured by Davey & Co. in England and are available in a range of sizes...

Davey and Company

Bronze Gaff Span Shackle

Davey & Co. manufacture these gunmetal bronze gaff span shackles in a range of jaw widths.  This shackle attaches to the peak halyard span wire to tension the leech. The design of this bronze shackle ensures loads are spread to minimise wear of...

Davey and Company

Bronze Boom End - Clew

Gunmetal bronze clew boom end from Davey & Co.  This fitting fits over the end of the boom and has a double swivelling tang for roller reefing. Two #8 countershunk holes are pre-drilled for mounting to the boom.  The eye at the top of the...

Davey and Company

Bronze Boom End - Tack

Gunmetal bronze tack boom end from Davey & Co.  This fitting fits over the mast-end of the boom and has a square cutout measuring 13mm (1/2") and two #6 countershunk holes for mounting to the boom.  The spikes of Davey's goose-neck fittings...

Davey and Company

Bronze Track Slide - Internal

Bronze slides from Davey that are compatible with Davey's internal brass sail track. Available to suit 3/4" (19mm) and 1" (25mm) internal track, these slides are cast from gunmetal bronze. SKU Size Davey's Code 026025 3/4" (19mm) 1321/GM/S/19 ...

Davey and Company

Brass Track Slides - Internal

Brass slides from Davey that are compatible with Davey's internal brass track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet.

Davey and Company

Brass Track Slides - External

Brass slides from Davey that are compatible with Davey's external track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. SKU Suits Track Width CBS-026000 5/8" (16mm) CBS-026001 3/4" (19mm)

Davey and Company

Bronze Mast Bands - 2 Eye

Bronze mast bands or cranse irons for traditional sailing boats from Davey & Co.  These beautiful fittings have two eyes but are undrilled allowing flexibility as to the location of fixing holes. The bands are available in in either a...

Davey and Company

Brass Sailing Dinghy Sliding Gooseneck

A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing a shackle.  The spike requires a 12mm x 12mm...

Davey and Company

Bronze Mast Bands - 4 Eye

Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats.  These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a mast or bow sprit.   Note that...

Davey and Company

Bronze Halfband & Spike

These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to fixing booms to masts on traditional sailing boats. The...