Categories

Bronze Mast Bands - 4 Eye

Bronze Mast Bands - 4 Eye

$107.20
(5 reviews) Write a Review
SKU:
DVY-3418/GM/038

Description

Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats.  These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a mast or bow sprit.  

Note that the mast bands come with no fastening holes which allows for flexible installation. 

SKUInternal Diameter (A)Band Length (B)Eye Internal Diameter (C)Tang Length (D)Davey & Co. Product Code
DVY-3418/GM/038 1-1/2" (38mm) 1" (24mm) 5/16" (8mm) 1" (25mm) 3418/GM/038
DVY-3418/GM/050 2" (52mm) 1" (25mm) 5/16" (8mm) 1" (25mm) 3418/GM/050
DVY-3418/GM/062 2-1/2" (62mm) 1-1/8" (29mm) 3/8" (10mm) 1" (25mm) 3418/GM/062
DVY-3418/GM/075 3" (76mm) 1-1/4" (31mm) 1/2" (13mm) 1-1/4" (31mm) 3418/GM/075
DVY-3418/GM/087 3-1/2" (88mm 1-1/4" (31mm) 1/2" (13mm) 1-1/4" (31mm) 3418/GM/087
DVY-3418/GM/100 4" (100mm) 1-1/4" (31mm) 1/2" (13mm) 1-1/4" (31mm) 3418/GM/100

mast band four eye

5 Reviews

  • 5
    Bronze Mast Band

    Posted by Jeff Howard on 26th Feb 2022

    Very Good quality exactly what i needed

  • 5
    This product I found hard to locate considering timber boats equipment seems to have been phased out but Classic Supplies hold the bar high and support wooden boat builders. Thanks for that.

    Posted by mickhickson@hotmail.com on 30th Jun 2021

    I was at the point of welding a mast band from Stainless but this is much more desired visually and specific.

  • 5
    Pricey but.....

    Posted by BRIAN KEATING on 15th Nov 2017

    QUITE HEFTY AND BURNISHED AND POLISHED TO A FINE FINISH. NICE WORKMANSHIP AND WILL LAST FOREVER.

  • 5
    Bronze Mast Band

    Posted by Bill on 12th Nov 2015

    An exquisite, polished piece of bronze marine hardware. Exactly as described and delivered within days. Well done, crew

  • 5
    Re: Bowsprit collar

    Posted by Leslie William Bell on 15th Apr 2014

    It is an excellent casting. I found no cracks and no voids. Also a very nice job of polishing. There is slight variations in thickness and straightness but this is consistent with all castings. I was a machinist and know the time a cost of such processes. Therefore I find this item very suitable for it's intended purpose.