Bronze Spar End Bronze spar ends in a range of sizes to suit different spar or boom widths. Manufactured in the UK, these fittings have an elegant design and suit most of our range of gaff saddles and mast fittings... USD134.74 Choose Options Bronze Mast Traveller - Unleathered This elegant welded bronze ring fitting is unleathered. Leathererd mast travellers are also available. Bronze mast travellers are used on lug-rigged boats s USD61.16 Choose Options Davey and Company Bronze Boom Crutch Socket A solidly cast bronze boom crutch socket from Davey & Co, complete with drain hole. Use this fittiing to lock a removable boom crutch in position within the cockpit. Available in a polished bronze... USD164.88 USD177.58 Choose Options Davey and Company Timber Parrel Beads Parrel beads are normally used to hold the jaws of a sliding gaff to the mast. Our wooden parrel beads are turned from Ash and coated with linseed oil. They are manufactured by Davey & Co. in... USD7.72 Choose Options Davey and Company Bronze Gaff Span Shackle Davey & Co. manufacture these gunmetal bronze gaff span shackles in a range of jaw widths. This shackle attaches to the peak halyard span wire to tension the leech. The design of this bronze shackle... USD54.26 Choose Options Davey and Company Bronze Boom End - Clew Gunmetal bronze clew boom end from Davey & Co. This fitting fits over the end of the boom and has a double swivelling tang for roller reefing. Two #8 countershunk holes are pre-drilled for mounting... USD157.65 USD169.79 Choose Options Davey and Company Bronze Boom End - Tack Gunmetal bronze tack boom end from Davey & Co. This fitting fits over the mast-end of the boom and has a square cutout measuring 13mm (1/2") and two #6 countershunk holes for mounting to the boom... USD96.30 USD103.67 Choose Options Davey and Company Bronze Track Slide - Internal Bronze slides from Davey that are compatible with Davey's internal brass sail track. Available to suit 3/4" (19mm) and 1" (25mm) internal track, these slides are cast from gunmetal bronze. SKU... USD13.87 USD26.74 Choose Options Davey and Company Brass Track Slides - Internal Brass slides from Davey that are compatible with Davey's internal brass track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. USD8.03 USD15.65 Choose Options Davey and Company Brass Track Slides - External Brass slides from Davey that are compatible with Davey's external track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. SKUSuits Track... USD17.34 Choose Options Davey and Company Bronze Mast Bands - 2 Eye Bronze mast bands or cranse irons for traditional sailing boats from Davey & Co. These beautiful fittings have two eyes but are undrilled allowing flexibility as to the location of fixing holes... USD75.38 Choose Options Davey and Company Brass Sailing Dinghy Sliding Gooseneck A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing... USD173.38 USD186.71 Add to Cart Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Bronze Mast Traveller - Unleathered This elegant welded bronze ring fitting is unleathered. Leathererd mast travellers are also available. Bronze mast travellers are used on lug-rigged boats s USD61.16 Choose Options Davey and Company Bronze Boom Crutch Socket A solidly cast bronze boom crutch socket from Davey & Co, complete with drain hole. Use this fittiing to lock a removable boom crutch in position within the cockpit. Available in a polished bronze... USD164.88 USD177.58 Choose Options Davey and Company Timber Parrel Beads Parrel beads are normally used to hold the jaws of a sliding gaff to the mast. Our wooden parrel beads are turned from Ash and coated with linseed oil. They are manufactured by Davey & Co. in... USD7.72 Choose Options Davey and Company Bronze Gaff Span Shackle Davey & Co. manufacture these gunmetal bronze gaff span shackles in a range of jaw widths. This shackle attaches to the peak halyard span wire to tension the leech. The design of this bronze shackle... USD54.26 Choose Options Davey and Company Bronze Boom End - Clew Gunmetal bronze clew boom end from Davey & Co. This fitting fits over the end of the boom and has a double swivelling tang for roller reefing. Two #8 countershunk holes are pre-drilled for mounting... USD157.65 USD169.79 Choose Options Davey and Company Bronze Boom End - Tack Gunmetal bronze tack boom end from Davey & Co. This fitting fits over the mast-end of the boom and has a square cutout measuring 13mm (1/2") and two #6 countershunk holes for mounting to the boom... USD96.30 USD103.67 Choose Options Davey and Company Bronze Track Slide - Internal Bronze slides from Davey that are compatible with Davey's internal brass sail track. Available to suit 3/4" (19mm) and 1" (25mm) internal track, these slides are cast from gunmetal bronze. SKU... USD13.87 USD26.74 Choose Options Davey and Company Brass Track Slides - Internal Brass slides from Davey that are compatible with Davey's internal brass track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. USD8.03 USD15.65 Choose Options Davey and Company Brass Track Slides - External Brass slides from Davey that are compatible with Davey's external track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. SKUSuits Track... USD17.34 Choose Options Davey and Company Bronze Mast Bands - 2 Eye Bronze mast bands or cranse irons for traditional sailing boats from Davey & Co. These beautiful fittings have two eyes but are undrilled allowing flexibility as to the location of fixing holes... USD75.38 Choose Options Davey and Company Brass Sailing Dinghy Sliding Gooseneck A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing... USD173.38 USD186.71 Add to Cart Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Davey and Company Bronze Boom Crutch Socket A solidly cast bronze boom crutch socket from Davey & Co, complete with drain hole. Use this fittiing to lock a removable boom crutch in position within the cockpit. Available in a polished bronze... USD164.88 USD177.58 Choose Options Davey and Company Timber Parrel Beads Parrel beads are normally used to hold the jaws of a sliding gaff to the mast. Our wooden parrel beads are turned from Ash and coated with linseed oil. They are manufactured by Davey & Co. in... USD7.72 Choose Options Davey and Company Bronze Gaff Span Shackle Davey & Co. manufacture these gunmetal bronze gaff span shackles in a range of jaw widths. This shackle attaches to the peak halyard span wire to tension the leech. The design of this bronze shackle... USD54.26 Choose Options Davey and Company Bronze Boom End - Clew Gunmetal bronze clew boom end from Davey & Co. This fitting fits over the end of the boom and has a double swivelling tang for roller reefing. Two #8 countershunk holes are pre-drilled for mounting... USD157.65 USD169.79 Choose Options Davey and Company Bronze Boom End - Tack Gunmetal bronze tack boom end from Davey & Co. This fitting fits over the mast-end of the boom and has a square cutout measuring 13mm (1/2") and two #6 countershunk holes for mounting to the boom... USD96.30 USD103.67 Choose Options Davey and Company Bronze Track Slide - Internal Bronze slides from Davey that are compatible with Davey's internal brass sail track. Available to suit 3/4" (19mm) and 1" (25mm) internal track, these slides are cast from gunmetal bronze. SKU... USD13.87 USD26.74 Choose Options Davey and Company Brass Track Slides - Internal Brass slides from Davey that are compatible with Davey's internal brass track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. USD8.03 USD15.65 Choose Options Davey and Company Brass Track Slides - External Brass slides from Davey that are compatible with Davey's external track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. SKUSuits Track... USD17.34 Choose Options Davey and Company Bronze Mast Bands - 2 Eye Bronze mast bands or cranse irons for traditional sailing boats from Davey & Co. These beautiful fittings have two eyes but are undrilled allowing flexibility as to the location of fixing holes... USD75.38 Choose Options Davey and Company Brass Sailing Dinghy Sliding Gooseneck A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing... USD173.38 USD186.71 Add to Cart Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Davey and Company Timber Parrel Beads Parrel beads are normally used to hold the jaws of a sliding gaff to the mast. Our wooden parrel beads are turned from Ash and coated with linseed oil. They are manufactured by Davey & Co. in... USD7.72 Choose Options Davey and Company Bronze Gaff Span Shackle Davey & Co. manufacture these gunmetal bronze gaff span shackles in a range of jaw widths. This shackle attaches to the peak halyard span wire to tension the leech. The design of this bronze shackle... USD54.26 Choose Options Davey and Company Bronze Boom End - Clew Gunmetal bronze clew boom end from Davey & Co. This fitting fits over the end of the boom and has a double swivelling tang for roller reefing. Two #8 countershunk holes are pre-drilled for mounting... USD157.65 USD169.79 Choose Options Davey and Company Bronze Boom End - Tack Gunmetal bronze tack boom end from Davey & Co. This fitting fits over the mast-end of the boom and has a square cutout measuring 13mm (1/2") and two #6 countershunk holes for mounting to the boom... USD96.30 USD103.67 Choose Options Davey and Company Bronze Track Slide - Internal Bronze slides from Davey that are compatible with Davey's internal brass sail track. Available to suit 3/4" (19mm) and 1" (25mm) internal track, these slides are cast from gunmetal bronze. SKU... USD13.87 USD26.74 Choose Options Davey and Company Brass Track Slides - Internal Brass slides from Davey that are compatible with Davey's internal brass track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. USD8.03 USD15.65 Choose Options Davey and Company Brass Track Slides - External Brass slides from Davey that are compatible with Davey's external track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. SKUSuits Track... USD17.34 Choose Options Davey and Company Bronze Mast Bands - 2 Eye Bronze mast bands or cranse irons for traditional sailing boats from Davey & Co. These beautiful fittings have two eyes but are undrilled allowing flexibility as to the location of fixing holes... USD75.38 Choose Options Davey and Company Brass Sailing Dinghy Sliding Gooseneck A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing... USD173.38 USD186.71 Add to Cart Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Davey and Company Bronze Gaff Span Shackle Davey & Co. manufacture these gunmetal bronze gaff span shackles in a range of jaw widths. This shackle attaches to the peak halyard span wire to tension the leech. The design of this bronze shackle... USD54.26 Choose Options Davey and Company Bronze Boom End - Clew Gunmetal bronze clew boom end from Davey & Co. This fitting fits over the end of the boom and has a double swivelling tang for roller reefing. Two #8 countershunk holes are pre-drilled for mounting... USD157.65 USD169.79 Choose Options Davey and Company Bronze Boom End - Tack Gunmetal bronze tack boom end from Davey & Co. This fitting fits over the mast-end of the boom and has a square cutout measuring 13mm (1/2") and two #6 countershunk holes for mounting to the boom... USD96.30 USD103.67 Choose Options Davey and Company Bronze Track Slide - Internal Bronze slides from Davey that are compatible with Davey's internal brass sail track. Available to suit 3/4" (19mm) and 1" (25mm) internal track, these slides are cast from gunmetal bronze. SKU... USD13.87 USD26.74 Choose Options Davey and Company Brass Track Slides - Internal Brass slides from Davey that are compatible with Davey's internal brass track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. USD8.03 USD15.65 Choose Options Davey and Company Brass Track Slides - External Brass slides from Davey that are compatible with Davey's external track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. SKUSuits Track... USD17.34 Choose Options Davey and Company Bronze Mast Bands - 2 Eye Bronze mast bands or cranse irons for traditional sailing boats from Davey & Co. These beautiful fittings have two eyes but are undrilled allowing flexibility as to the location of fixing holes... USD75.38 Choose Options Davey and Company Brass Sailing Dinghy Sliding Gooseneck A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing... USD173.38 USD186.71 Add to Cart Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Davey and Company Bronze Boom End - Clew Gunmetal bronze clew boom end from Davey & Co. This fitting fits over the end of the boom and has a double swivelling tang for roller reefing. Two #8 countershunk holes are pre-drilled for mounting... USD157.65 USD169.79 Choose Options Davey and Company Bronze Boom End - Tack Gunmetal bronze tack boom end from Davey & Co. This fitting fits over the mast-end of the boom and has a square cutout measuring 13mm (1/2") and two #6 countershunk holes for mounting to the boom... USD96.30 USD103.67 Choose Options Davey and Company Bronze Track Slide - Internal Bronze slides from Davey that are compatible with Davey's internal brass sail track. Available to suit 3/4" (19mm) and 1" (25mm) internal track, these slides are cast from gunmetal bronze. SKU... USD13.87 USD26.74 Choose Options Davey and Company Brass Track Slides - Internal Brass slides from Davey that are compatible with Davey's internal brass track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. USD8.03 USD15.65 Choose Options Davey and Company Brass Track Slides - External Brass slides from Davey that are compatible with Davey's external track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. SKUSuits Track... USD17.34 Choose Options Davey and Company Bronze Mast Bands - 2 Eye Bronze mast bands or cranse irons for traditional sailing boats from Davey & Co. These beautiful fittings have two eyes but are undrilled allowing flexibility as to the location of fixing holes... USD75.38 Choose Options Davey and Company Brass Sailing Dinghy Sliding Gooseneck A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing... USD173.38 USD186.71 Add to Cart Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Davey and Company Bronze Boom End - Tack Gunmetal bronze tack boom end from Davey & Co. This fitting fits over the mast-end of the boom and has a square cutout measuring 13mm (1/2") and two #6 countershunk holes for mounting to the boom... USD96.30 USD103.67 Choose Options Davey and Company Bronze Track Slide - Internal Bronze slides from Davey that are compatible with Davey's internal brass sail track. Available to suit 3/4" (19mm) and 1" (25mm) internal track, these slides are cast from gunmetal bronze. SKU... USD13.87 USD26.74 Choose Options Davey and Company Brass Track Slides - Internal Brass slides from Davey that are compatible with Davey's internal brass track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. USD8.03 USD15.65 Choose Options Davey and Company Brass Track Slides - External Brass slides from Davey that are compatible with Davey's external track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. SKUSuits Track... USD17.34 Choose Options Davey and Company Bronze Mast Bands - 2 Eye Bronze mast bands or cranse irons for traditional sailing boats from Davey & Co. These beautiful fittings have two eyes but are undrilled allowing flexibility as to the location of fixing holes... USD75.38 Choose Options Davey and Company Brass Sailing Dinghy Sliding Gooseneck A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing... USD173.38 USD186.71 Add to Cart Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Davey and Company Bronze Track Slide - Internal Bronze slides from Davey that are compatible with Davey's internal brass sail track. Available to suit 3/4" (19mm) and 1" (25mm) internal track, these slides are cast from gunmetal bronze. SKU... USD13.87 USD26.74 Choose Options Davey and Company Brass Track Slides - Internal Brass slides from Davey that are compatible with Davey's internal brass track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. USD8.03 USD15.65 Choose Options Davey and Company Brass Track Slides - External Brass slides from Davey that are compatible with Davey's external track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. SKUSuits Track... USD17.34 Choose Options Davey and Company Bronze Mast Bands - 2 Eye Bronze mast bands or cranse irons for traditional sailing boats from Davey & Co. These beautiful fittings have two eyes but are undrilled allowing flexibility as to the location of fixing holes... USD75.38 Choose Options Davey and Company Brass Sailing Dinghy Sliding Gooseneck A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing... USD173.38 USD186.71 Add to Cart Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Davey and Company Brass Track Slides - Internal Brass slides from Davey that are compatible with Davey's internal brass track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. USD8.03 USD15.65 Choose Options Davey and Company Brass Track Slides - External Brass slides from Davey that are compatible with Davey's external track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. SKUSuits Track... USD17.34 Choose Options Davey and Company Bronze Mast Bands - 2 Eye Bronze mast bands or cranse irons for traditional sailing boats from Davey & Co. These beautiful fittings have two eyes but are undrilled allowing flexibility as to the location of fixing holes... USD75.38 Choose Options Davey and Company Brass Sailing Dinghy Sliding Gooseneck A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing... USD173.38 USD186.71 Add to Cart Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Davey and Company Brass Track Slides - External Brass slides from Davey that are compatible with Davey's external track. Available to suit 5/8" (16mm) or 3/4" (19mm) track, these slides are formed from brass sheet. SKUSuits Track... USD17.34 Choose Options Davey and Company Bronze Mast Bands - 2 Eye Bronze mast bands or cranse irons for traditional sailing boats from Davey & Co. These beautiful fittings have two eyes but are undrilled allowing flexibility as to the location of fixing holes... USD75.38 Choose Options Davey and Company Brass Sailing Dinghy Sliding Gooseneck A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing... USD173.38 USD186.71 Add to Cart Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Davey and Company Bronze Mast Bands - 2 Eye Bronze mast bands or cranse irons for traditional sailing boats from Davey & Co. These beautiful fittings have two eyes but are undrilled allowing flexibility as to the location of fixing holes... USD75.38 Choose Options Davey and Company Brass Sailing Dinghy Sliding Gooseneck A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing... USD173.38 USD186.71 Add to Cart Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Davey and Company Brass Sailing Dinghy Sliding Gooseneck A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing... USD173.38 USD186.71 Add to Cart Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Davey and Company Bronze Mast Bands - 4 Eye Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats. These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a... USD84.02 USD90.47 Choose Options Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options ×
Davey and Company Bronze Halfband & Spike These solid bronze half band & spike fittings are manufactured in England Secured with two or three screws (depending on size) these beautifully finished fittings provide an elegant solution to... USD175.33 USD188.82 Choose Options
