Spartan Marine Hardware

Manganese Bronze Locking Chock

This bronze locking chock has been designed to quickly accept an anchor or mooring line and lock it in place. This chock can also be considered for the stern where rising and falling tides can easily cause a dock line to escape from a straight chock...

Spartan Marine Hardware

Bronze Jam Cleat (3")

Spartan Marine Hardware

Bronze Jam Cleat (6")

Spartan Marine Hardware

Bronze Fairlead - G-Chock (Pair)

Solid bronze G-chocks from Spartan Marine.  Sold in pairs, these chocks have a burnished bronze finish. SKU Length Width Height Hole Centres Spartan's Code 180341 4" (107mm) 1-1/8" (28mm) 1-1/4" (35mm) 3-1/4" (82mm) C246/C246PB 180342 5"...

Spartan Marine Hardware

Bronze Exhaust Flange

Bronze exhaust outlets from Spartan Marine in the USA. These high-quality fittings have three mounting holes with long hose adapters to penetrate through the transom. SKUSuits Hose DiameterHose TailFlange DiameterFastenings SPA-303 1-1/2"...

Spartan Marine Hardware

Bronze Dinghy Quarter Knees

Gunmetal bronze quarter knees suitable for transom braces on small dinghies.  Mounted with 4 x 10-gauge screws. Each bracket offers a 1/4" (6mm) hole for mainsheet bridle termination where a sailing rig is used. Notes: 1. This fitting has rather an...

Spartan Marine Hardware

Bronze Deck Filler Cap - Diesel

This burnished bronze deck filler cap from Spartan Marine (USA) is marked "Diesel".  It has a low profile crown and rounded edges. An O-ring provides a watertight seal, and the cap is attached to the deck plate with a small jack chain. ...

Spartan Marine Hardware

Bronze Hasp with Spring

Gunmetal bronze spring hasps from Spartan Marine.  These useful hatch fasteners come in two sizes - 3-1/4" and 4" - with a burnished finish. SKU Overall Length Staple Dimensions(L x W)    Hasp Dimensions(L x W)  Hole Centres(L...

Spartan Marine Hardware

Bronze Coaming Cleat

A solid bronze 5" horn cleat designed to mount to the side of a cockpit coaming, pilot house, etc. This cleat is tapped with two 1/4"-20 (UNC) threads and a bronze backing plate is available for secure mounting (machine screws and backing plate are sold...

Spartan Marine Hardware

Bronze Coaming Cleat - Diamond

A solid bronze 6" horn cleat designed to mount to the side of a cockpit coaming, pilot house, etc. This cleat is tapped with three 1/4"-20 (UNC) threads and a bronze backing plate is available for secure mounting (machine screws and backing plate are...

Davey and Company

Brass Belaying Pins

Belaying pins are used to secure the running rigging on traditional vessels.   These small brass belaying pins from Davey & Co. are available in a range of sizes and can be chrome-plated to order (additional charges apply). If you are looking...

Davey and Company

Timber Belaying Pins

Belaying pins are used to secure the running rigging on traditional vessels.   These finely turned ash belaying pins from Davey & Co. have a natural wood finish and are available in a range of sizes as set out below. If you are looking for...

Davey and Company

Bronze Belaying Pins

Belaying pins are used to secure the running rigging on traditional vessels.   These finely made gunmetal bronze belaying pins from Davey & Co. are available in a range of sizes and can be chrome-plated to order (additional charges apply). For...

Spartan Marine Hardware

Bronze Outboard Mounting Bracket

Spartan Marine's outboard bracket is made of cast bronze and heavy hardwood to provide a rugged, dependable method of mounting an outboard motor up to 6 h.p. on the stern of sailboats with an afterdeck of 200mm (8") or more.  Note that the...

Davey and Company

Bronze Boom End - Clew

Gunmetal bronze clew boom end from Davey & Co.  This fitting fits over the end of the boom and has a double swivelling tang for roller reefing. Two #8 countershunk holes are pre-drilled for mounting to the boom.  The eye at the top of the...

Davey and Company

Bronze Boom End - Tack

Gunmetal bronze tack boom end from Davey & Co.  This fitting fits over the mast-end of the boom and has a square cutout measuring 13mm (1/2") and two #6 countershunk holes for mounting to the boom.  The spikes of Davey's goose-neck fittings...

Davey and Company

Davey Round Fixed Deadlight

Heavy duty round fixed bronze portlights.  Traditionally hand-made in England to the highest standard and CE marked for upper hull areas and cabin sides. Supplied with an outside finishing ring, they are fitted with toughened glass and have a...

Spartan Marine Hardware

Bronze Deck Cleats - 4 Hole

Bronze deck cleats from US manufacturer Spartan.  These strong cleats feature four counter-sunk mounting holes to allow solid mounting through the deck. Available in a range of sizes, these cleats come in a burnished finish. SKU Arm...

Spartan Marine Hardware

Bronze Herreshoff Cleats

Bronze Herreshoff cleats from US manufacturer Spartan.  These strong, traditional cleats feature four counter-sunk mounting holes to allow solid mounting through the deck. Available in a range of sizes, these cleats come in a burnished finish...

Spartan Marine Hardware

Bronze Butt Hinges 4" - Spartan

Bronze butt hinge from US manufacturer Spartan measuring 3-1/2" x 1-3/8" (88mm x 35mm) when open. These bronze hinges feature a stainless steel hinge pin and can be fastened with 6 x 8-gauge screws.  They are suitable for hatches, doors cabinets,...