Description
Bronze drain plugs with screw plug insert, complete with rubber seal, available in a range of sizes.
The thread is drilled so that when loosened, the plugs allow a small amount of water to drain. Unscrew the plug completely for higher water throughput.
These transom drainage plugs are made in the UK. The plugs are drilled to allow them to be tethered to avoid loss.
| SKU | Thread Size | Hull Cutout | Flange Diameter | Davey's Product Code |
|---|---|---|---|---|
| 020701 | 1/2" (12mm) | 3/4" (19mm) | 1-5/8" (42mm) | 1441/GM/12 |
| 020702 | 3/4" (19mm) | 1" (25mm) | 2" (50mm) | 1441/GM/19 |
| 020703 | 1" (25mm) | 1-3/16" (30mm) | 1-1/8" (54mm) | 1441/GM/25 |
| 020704 | 1-1/4" (32mm) | 1-1/2" (38mm) | 2-1/2 (65mm) | 1441/GM/32 |
2 Reviews
-
Brass plug
Just what I needed.
-
bronze drain plug - Davey
In searching for drain plugs for my home built 22 foot Simmons Sea Skiff, I ran across this site. The drain plug design had everything a drain plug should have: 1)made of bronze; 2) different size drain diameters; 3)a *tether hole* so cap would sink to the bottom of the sea. My original thought was to buy the 1-1/4in. But I ended up buying the 1/2in instead. When it arrived in the mail, I realized that 1/2in just wouldn't quite empty water fast enough; so I reordered the 1-1/4in size. I know I will be glad I did. I am impressed with the detail of this plug. And I know once installed in my boat (I need two - one on each side of the motorwell) it will serve me for many years. I'm glad I found this product. Even though its a half a world away, it's worth every penny.
