Deck Hardware

Davey and Company

Brass Sailing Dinghy Sliding Gooseneck

A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing a shackle.  The spike requires a 12mm x 12mm...

Davey and Company

Bronze Lightweight 4-Piece Rudder Kit - Single Strap

Single strap bronze rudder kit suitable for lightweight dinghies of up to about 8 feet long. Made in England, this 4-piece set is beautifully cast and polished. The set consists of two transom-mounted gudgeons and two rudder-mounted pintles. The rudder...

Manganese Bronze Thimble - Closed

Quality New Zealand-made closed thimbles cast in manganese bronze. The 45mm thimble will take up to a 10mm rope, while the 67mm will take up to 14mm rope diameter under tension. SKUOverall LengthMax WidthSuits...

Bronze Drain Plugs - Flush

Australian-made half-inch bronze drain plugs (or garboard drain) with screw plug insert. SKUDiameterCutout Diameter BRG-B300B 2-1/4" (55mm) 1-1/4" (30mm)

Davey and Company

Bronze Mast Bands - 4 Eye

Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats.  These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a mast or bow sprit.   Note that...

Davey and Company

Davey Bronze Round Opening Portlight (with spigot & trim ring)

Specially designed for the upper-hull areas, top-sides, cabin-sides and deck-houses, these traditionally hand-made round portholes (also known as portlights or scuttles) come complete with a matching bronze trim ring. The 8" & 12" portholes have two...

Bronze Intake Strainers

Quality NZ-made bronze intake strainers for use on salt water inlets for water-cooled engines, etc. Designed to admit a full supply of water at all speeds and to prevent clogging.  SKU Size Outside Flange Inside Flange Fasteners CBS-012801 4"...

Davey and Company

Bronze Boat Hook

Admiralty type boat hooks cast from bronze and made in the UK by Davey & Co.   Polished and ready to fix to a wooden staff of you choice.   For fastening we recommend two 8g x 3/4" silicon bronze screws for the 8" hook, or two 8g x 1"...

Davey and Company

Davey Bronze Bow Fairleads - Port or Starboard

Davey Bronze Bow Fairleads - Port or Starboard Beautiful heavy-duty angled bronze fairleads, or bow chocks, made to the highest standards. Available in marine quality polished bronze. The price quoted is for one port or one starboard fairlead...

Davey and Company

Davey Bronze Stern Fairlead

Quality solid bronze stern chocks, or straight fairleads. Three countersunk fastening holes enable firm fixing to the deck using either silicon bronze wood screws, or machine screws if through-deck bolting is required.  SKULengthWidthMax Rope...

MURRAY - Traditional Winches & Marine Hardware

Bronze Eye Bolt 5/16"

Marine quality manganese bronze eye bolts in a rumbled finish. These tough eye bolts are made in New Zealand and have a wide range of uses aboard any vessel.  Use for through-bolting rigging hardware, mooring lines, etc. SKUShaft LengthOverall...

Davey and Company

Fixed Eye Wooden Block - Single with Becket

Beautiful European-made traditional timber single blocks with becket to complement any classic sailing vessel. The shells are constructed from ash timber varnished to a high gloss, while the bindings and bearings are out of stainless steel. The sheaves...

Davey and Company

Bronze Cross Bollards - Davey

Traditional gunmetal bronze cross bollards from Davey & Co.  These antique-style cross bollards give a classic look to vessels, and are available in a range of lengths to suit small and larger vessels. Available in a polished bronze finish, or...

Davey and Company

Bronze Standard 4-Piece Rudder Kits

Polished bronze sailboat rudder kits suitable for medium-sized sailing boats, up to around 18 feet in length.  The straps are cast in a range of widths to suit most vessels. Made in England, this 4-piece set is beautifully cast and polished...

Davey and Company

Bronze Lightweight 4-Piece Rudder Kit 2-1/8"

Solid bronze rudder kit suitable for a wider rudder on a small to medium-sized sailing dinghy.  The straps are wide-set at 2-1/8" apart. Made in England, this 4-piece set is beautifully cast and polished. The set consists of: One transom-mounted...

Davey and Company

Fixed Eye Wooden Block - Single

Beautiful European-made traditional wooden blocks to complement any classic sailing vessel. The shells are constructed from ash timber varnished to a high gloss, while the bindings and bearings are out of stainless steel. The sheaves on blocks up to 4"...

Davey and Company

Davey Bronze Mooring Bollard

Gunmetal bronze mooring bollards (or mooring bitts) suitable for use either onboard or ashore on jetties and wharves. Manufactured in England, these robust yet stylish bronze bollards can be secured with 4 x 5/16" silicon bronze machine screws. Part...

Davey and Company

Bronze Bollard Cleats - Screwed & Bolted

Davey bronze bollard cleats with an integral bolt for secure fastening, combined with screws for extra security.  Ideally suited as for use as a solid mooring bollard positioned either on the bow or stern. These heavy cast bollard cleats are made...

Davey and Company

Bronze Bollard Cleats - Bolted

Davey bronze bollard cleats with an integral bolt for secure fastening.  Ideally suited as a solid mooring bollard positioned either on the bow or stern. These heavy cast bollard cleats are made in England and are available in a range of sizes...

Davey and Company

Davey Bronze Bollard Cleats - Fluted

Bronze bollard cleats with a traditional fluted design. These heavy cast bollard cleats are made in England and are available in a range of sizes, both in polished bronze or chrome-plated finish. We recommend these bollards are fastened through the deck...