Deck Hardware

Davey and Company

Bronze Shell Vent

Stylish bronze vent commonly used for ventilating engine bays on timber motor boats. Part of the Davey range of boat hardware from England, these vents can be fitted with or without the included trim ring.  The trim ring is a separate component that...

Davey and Company

Mushroom Vents - Low Domed Pattern

Smaller low-profile mushroom ventilators with a domed profile.  Cast in bronze, these UK-made vents have a low spigot and are ideal for mounting flush to cabin tops and other areas unlikely to become awash. Their low, domed-profile means sheets will...

Davey and Company

Mushroom Vents - Low Flat Pattern

Smaller low-profile mushroom ventilators with a flat profile.  Cast in bronze, these UK-made vents mount flush to cabin tops.  With a lower spigot height they are more suited to areas unlikely to become awash. The ventilator can be operated...

Davey and Company

Davey Bronze Open Top Cleats

Solid bronze open top cleats made in England by Davey & Co. These cleats are beautifully cast and polished. Their open top design makes open top cleats useful as both a cleat and part-time fairlead. Available in a range of sizes and can be chrome...

Davey and Company

Brass Sailing Dinghy Sliding Gooseneck

A quality sliding gooseneck fitting suitable for traditional sailing dinghies and other small boats. Made of brass, this sailing boat fitting consists of a spike on a gooseneck with tangs for fixing a shackle.  The spike requires a 12mm x 12mm...

Davey and Company

Bronze Lightweight 4-Piece Rudder Kit - Single Strap

Single strap bronze rudder kit suitable for lightweight dinghies of up to about 8 feet long. Made in England, this 4-piece set is beautifully cast and polished. The set consists of two transom-mounted gudgeons and two rudder-mounted pintles. The rudder...

Manganese Bronze Thimble - Closed

Quality New Zealand-made closed thimbles cast in manganese bronze. The 45mm thimble will take up to a 10mm rope, while the 67mm will take up to 14mm rope diameter under tension. SKUOverall LengthMax WidthSuits...

Bronze Drain Plugs - Flush

Australian-made half-inch bronze drain plugs (or garboard drain) with screw plug insert. SKUDiameterCutout Diameter BRG-B300B 2-1/4" (55mm) 1-1/4" (30mm)

Davey and Company

Bronze Mast Bands - 4 Eye

Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats.  These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a mast or bow sprit.   Note that...

Bronze Half-Cowl Vents (Pairs)

Australian-made cast bronze half cowl vents.  Sold in sets of port and starboard pairs, these bronze ventilators are normally mounted to engine compartments, cabins and pilothouse sides to improve the flow of air. Three sizes are available, and...

Hand-Held Bronze Bell

Beautiful Australian-made bronze hand-held bell, complete with a turned timber handle.  The handle is clear varnished. These hand bells are popular with auctioneers, for use as school bells and as gifts. Bronze bells resonate with a wonderful tone...

Porthole - Round (with spigot & trim rings)

Australian-made opening round bronze port holes feature a deep spigot and trim ring. Available in polished or chrome-plated bronze. SKU Glass Diameter Flange Diameter Cut-Out Required Spigot Length 051811 3" (75mm) 6-1/4" (156mm) 4" (100mm) TBA...

Porthole - Round (without spigot)

These Australian-made opening round bronze port holes are without spigots.  Available in polished or chrome-plated bronze. SKU Glass Diameter Flange Diameter Cut-Out Required 051801 3" (75mm) 6-3/4" (170mm) 4" (100mm) 051803 4" (100mm)...

Davey and Company

Davey Bronze Round Opening Portlight (with spigot & trim ring)

Specially designed for the upper-hull areas, top-sides, cabin-sides and deck-houses, these traditionally hand-made round portholes (also known as portlights or scuttles) come complete with a matching bronze trim ring. The 8" & 12" portholes have two...

Bronze Intake Strainers

Quality NZ-made bronze intake strainers for use on salt water inlets for water-cooled engines, etc. Designed to admit a full supply of water at all speeds and to prevent clogging.  SKU Size Outside Flange Inside Flange Fasteners CBS-012801 4"...

Davey and Company

Bronze Boat Hook

Admiralty type boat hooks cast from bronze and made in the UK by Davey & Co.   Polished and ready to fix to a wooden staff of you choice.   For fastening we recommend two 8g x 3/4" silicon bronze screws for the 8" hook, or two 8g x 1"...

Davey and Company

Davey Bronze Bow Fairleads - Port or Starboard

Beautiful heavy-duty angled bronze fairleads, or bow chocks, made to the highest standards. Available in marine quality polished bronze. The price quoted is for one port or one starboard fairlead. SKULengthWidthMax Lead SizeHole...

Davey and Company

Davey Bronze Stern Fairlead

Quality solid bronze stern chocks, or straight fairleads. Three countersunk fastening holes enable firm fixing to the deck using either silicon bronze wood screws, or machine screws if through-deck bolting is required.  SKULengthWidthMax Rope...

MURRAY - Traditional Winches & Marine Hardware

Bronze Eye Bolt

Marine quality manganese bronze eye bolts in a rumbled finish. These tough eye bolts are made in New Zealand and have a wide range of uses aboard any vessel.  Use for through-bolting rigging hardware, mooring lines, etc. SKUShaft LengthOverall...

Davey and Company

Fixed Eye Wooden Block - Single with Becket

Beautiful European-made traditional timber single blocks with becket to complement any classic sailing vessel. The shells are constructed from ash timber varnished to a high gloss, while the bindings and bearings are out of stainless steel. The sheaves...