Deck Hardware

Bronze Drain Plugs - Flush

Australian-made half-inch bronze drain plugs (or garboard drain) with screw plug insert. SKUDiameterCutout Diameter BRG-B300B 2-1/4" (55mm) 1-1/4" (30mm)

Davey and Company

Bronze Mast Bands - 4 Eye

Davey & Co. gunmetal bronze mast bands or cranse irons for sailboats.  These beautiful cast fittings are non-tapering and have four eyes for attaching shrouds, a diamond, etc. as needed to either a mast or bow sprit.   Note that...

Davey and Company

Davey Bronze Round Opening Portlight (with spigot & trim ring)

Specially designed for the upper-hull areas, top-sides, cabin-sides and deck-houses, these traditionally hand-made round portholes (also known as portlights or scuttles) come complete with a matching bronze trim ring. The 8" & 12" portholes have two...

Davey and Company

Davey Bronze Bow Fairleads - Port or Starboard

Davey Bronze Bow Fairleads - Port or Starboard Beautiful heavy-duty angled bronze fairleads, or bow chocks, made to the highest standards. Available in marine quality polished bronze. The price quoted is for one port or one starboard fairlead...

MURRAY - Traditional Winches & Marine Hardware

Bronze Eye Bolt 5/16"

Marine quality manganese bronze eye bolts in a rumbled finish. These tough eye bolts are made in New Zealand and have a wide range of uses aboard any vessel.  Use for through-bolting rigging hardware, mooring lines, etc. SKUShaft LengthOverall...

Davey and Company

Bronze Standard 4-Piece Rudder Kits

Polished bronze sailboat rudder kits suitable for medium-sized sailing boats, up to around 18 feet in length.  The straps are cast in a range of widths to suit most vessels. Made in England, this 4-piece set is beautifully cast and polished...

Davey and Company

Bronze Lightweight 4-Piece Rudder Kit 2-1/8"

Solid bronze rudder kit suitable for a wider rudder on a small to medium-sized sailing dinghy.  The straps are wide-set at 2-1/8" apart. Made in England, this 4-piece set is beautifully cast and polished. The set consists of: One transom-mounted...

Davey and Company

Fixed Eye Wooden Block - Single

Beautiful European-made traditional wooden blocks to complement any classic sailing vessel. The shells are constructed from ash timber varnished to a high gloss, while the bindings and bearings are out of stainless steel. The sheaves on blocks up to 4"...

Davey and Company

Bronze Double Bollards

Traditional gunmetal double bronze bollards from Davey & Co.  These antique-style bollards give a classic look to vessels, and are available in a wide range of lengths to suit small and larger vessels. Available in a polished bronze finish, or...

Davey and Company

Bronze Torpedo Cleats - Curved Style

Torpedo-styled cleats with a classical, slightly curved profile. These solid bronze cleats are beautifully finished and firmly secured with four screws.   Sometimes known as "Fender Cleats", these fittings can also provide a quick and easy fender...

HYE - Holland Yacht Equipment

Single Tufnol Block - Fixed Bow with Becket

Tufnol is a traditional laminated plastic material made from phenolic resin and woven cotton or linen fabric.  It is strong and light, and provides an economical, low maintenance and traditional solution for sailing boat blocks. Our Tufnol...

HYE - Holland Yacht Equipment

Fiddle Tufnol Block - with Cam Cleat, Swivel & Becket

These fiddle Tufnol blocks have two uneven diameter sheaves located in-line. They have a becket at one end, a swiveled bow at the other and a cam cleat. They are ideal for main sheets. Fitted with a swivel eye, they come in two sizes to work with ropes...

HYE - Holland Yacht Equipment

Double Tufnol Block - Fixed Bow

Tufnol is a traditional laminated plastic material made from phenolic resin and woven cotton or linen fabric.  It is strong and light, and provides an economical, low maintenance and traditional solution for sailing boat blocks. Our Tufnol...

Davey and Company

Fixed Eye Wooden Block - Double

Beautiful English-made traditional wooden blocks to complement any classic sailing vessel. The shells are constructed from ash timber varnished to a high gloss, while the bindings and bearings are out of stainless steel. The sheaves on blocks up to 4"...

Davey and Company

Bronze Rowlock - Even (single)

Davey gunmetal bronze rowlocks with even forks. Sold individually (not as pairs). One rectangular bronze socked is included.  Additional oarlock sockets can be purchased separately. SKUJaw WidthStem DiameterOverall Length 1049/GM/50 2"...

Davey and Company

Bronze Bow Roller

Made in the UK, these quality bronze stemhead rollers (or bow rollers), are available in two sizes. With no holding pin they are more suitable for smaller vessels. The 2" model has a small lip to the front of the base. SKU  Size Roller Size...

Davey and Company

Bronze Blocks

Exquisite small polished bronze blocks or pulleys in a beautiful tear-drop style, manufactured in the UK by Davey & Co.  These blocks have brass sheaves. Note that the 1-1/2" bronze block is not available with a becket (the extra ring on...

Davey and Company

Brass Tubular Jam Cleat

Brass tubular jam cleats by Davey & Co.  These brass cleats are available for 6mm and 8mm lines. Tube cleats offer a practical and compact way to secure sheet leads and halyards. SKU Length Base Width Max. Line Size Fastenings Davey's Product...

Davey and Company

Bronze Rowlock Sockets - Side Mount Short

Side-mounted gunmetal bronze rowlock sockets to complement Davey's rowlocks.  These sockets are designed to accept 1/2" rowlock stems.  The price shown is for a single rowlock socket. SKUSocket StyleWidthTop DepthSide DepthStem...

Davey and Company

Bronze Oar Clamp

This bronze clamp holds and locks oars or paddles in place. The clamp's arms wrap around the oars while the shaft passes through the dinghies thwart or seat.  Once in position, a pin or padlock will secure the oars preventing their removal. Oar...